Comparator Reticles

KR-811D glass eyepiece comparator reticle. Minimum glass diameter for this reticle is 19mm. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality: 20/10 Parallelism: 2 min. NOTE: This is...

KR-844 glass eyepiece comparator to be used with 3x objective. Each division = 0.001" when using 3x objective. Reticles are available in a variety of diameters, select below when ordering. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2...

KR-810 glass eyepiece comparator protractor. Total of 360° with every 10º marked. Reticles are available in a variety of diameters, select below when ordering. Overall pattern tolerance: +/- 0.0002" / 0.005mm Diameter tolerance: +0.00 / -0...

KR-848 glass eyepiece comparator. Total of 360°, the top 180° is in 1° increments and the lower 180° is in 1/2 degree increments. Reticles are available in a variety of diameters, select below when ordering. Lines: Chrome...

KR-840 glass eyepiece comparator 180° angles, 0.001" radius. Reticles are available in a variety of diameters, select below when ordering.0.001" Radius with following objective options:2x = KR-840-24x = KR-840-45x = KR-840-510x = KR-840-10 Lines:...

KR-831 glass eyepiece half comparator with a total of 180°, marked every 10°. Field of view = 19mm. Alternate options:Field of view = 15mm (KR-831A)Field of view = 9.5mm (KR-831B)Field of view = 6mm (KR-831C)Field of view = 3mm (KR-831D)Field of...

KR-811G glass eyepiece general purpose comparator reticle to be used with 1x objective. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality: 20/10 Parallelism: 2 min.   NOTE: This...

KR-811F glass eyepiece comparator reticle to be used with 2x objective. Minimum glass diameter for this reticle is 16mm. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality:...

KR-811C glass eyepiece comparator reticle to be used with a 3x objective. Minimum glass diameter for this reticle is 24mm. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality:...

KR-811A glass eyepiece comparator reticle. Minimum glass diameter for this reticle is 20mm. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality: 20/10 Parallelism: 2 min.   NOTE:...

KR-811 glass eyepiece comparator reticle. Minimum glass diameter for this reticle is 26mm. Lines: Chrome deposition Chamfer: 0.010" - 0.020" Flatness: 2 waves or better Centering: Within 0.005" Surface Quality: 20/10 Parallelism: 2 min.   NOTE:...

Mitutoyo comparator reticle designed for use with the Mitutoyo 8x and 10x interchangeable reticle comparators.Comparator reticle contains: 9 Pitches from 0.25mm to 1mm. This reticle is not for true threadform comparison. Reticle diameter 30mm. Mitutoyo...